HotBodies Cyclone Counter-Steer setup Version 2 Front Set-up: Tc5 front 40t diff gear #ASC 31169 Tamiya 15t center #50878 Rear Set-up: YOKOMO 33T DIFF PULLEY #ZR-543-33 Hpi r 40 pulley set # 73477 Set-up starting point Parts used: Front set-up --- 40t diff pulley (tc5 parts) and 15t center pulley (tamiya or hpi) Rear set-up --- 33t diff pulley ( yokomo parts) and 23t center pulley (hpi r40 parts) Update: Cyclone belt count Cyclone and Cyclone-S 169T front 62T rear Cyclone TC 170T front 63T rear 33/23 with 62T belt fits perfect.  Set-up starting point Front diff a little loose Rear diff locked Springs use same rate springs Front weights 2 oz  Rear weights 2 oz if you are using lipo's -3 Front camber ---- may vary from tires and track surface -1 Rear camber ---- may vary from tires and track surface 4mm Kickup 0 Front toe block 3 Rear toe block Motor 8.5 ss sport 18t Pinion 78t Spur Video Clip Cyclone Counter-Steering This is just the basic steps you will still need to adjust you suspension to your driving style. (soft settings is the starting point)

Center pulley's 15t for the front (Im using tamiya parts you can also get an hpi parts) and 23t for the rear (hpi r40 parts set)   How to mount the R40 pulley to cyclone center shaft. You just need washer or some sort of tube to fit in between the shaft and pulley r40 pulley inner spacer #73508 Front view without the bumper you need at least 4mm spacers (kick-up) and -3 front camber and -1 camber for the rear