Feature:
- The ESC is USB supported. The firmware of
the ESC can be updated through an USB adapter on the Advanced
LCD Program Box (Optional device).(NEW)
- Especially designed for RC car, with excellent
start-up, acceleration and linearity features
- Compatible with sensorless brushless motor
- Use top quality of electronic components to
enhance the current endurance and capacity of the ESC.
- 2 running modes (Racing mode and
Forward/Backward mode)
- 4 steps of maximum reverse force adjustment
- Proportional ABS brake function with 4 steps
of 4th – 11th maximum brake force adjustment, 8 steps of drag-brake force
adjustment and 4 steps of initial brake force adjustment.
- 4 start modes (Also called “Punch”) from
“soft” to “very aggressive”.
- Multiple protection features: Low voltage
cut-off protection for lithium or nickel battery / Over-heat protection /
Throttle signal loss protection / Motor blocked protection.
- 8 steps of timing adjustment.
- Waterproof and dustproof.
- Easily program with only one button and
compatible with pocket-sized program card.
Specification:
- Cont. Current: 35A
- Burst Current: 190A
- Resistance: 0.015 ohm
- Suitable Car: 1/10 car
- Suitable Brushless Motor: > 9T (3650
brushless motor)
- Battery: 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3
Cell Li-Po
- BEC Output: 6V/1.5A
- Motor Type: Sensorless Brushless Motor
- Dimension: 31.5 x 27.5 x 24 (mm) (The height
of fan is excluded)
- Weight: 30g (Without wires)
| |
|
This site
features Smart Paypal Shopping Carts and state of the art Secure Servers by
Paypal 
This site features Smart Paypal Shopping Carts and state of the art Secure
Servers by Paypal
